国产99热精品_欧美疯狂做受xxxx猛交_婷婷在线网站_日韩无遮挡毛片_欧美高清momspuss_欧美激情福利

DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS232控制器OMEGA

顯示比率、批次總數和總計

費率和總價的單獨K系數

12至24伏輸出

可選16點線性化

NEMA 4X（IP65）前面板蓋

DP-F31速率計/積算器接受3至30 Vdc脈沖、干觸點閉合、電壓或毫安培輸入，并為批量控制提供2***SPDT繼電器輸出。該顯示器完全可擴展為工程單位，并可在批次總數、費率和總計之間切換。線性化選項允許用戶在輸入范圍內選擇多達16個不同的K系數，以精確指示非線性信號。

DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS232控制器OMEGA

規格

輸入功率：110 Vac±15%或12至27 Vdc標準；220 Vac±15%可選

電流：最大250 mA dc或3.2 VA

輸出功率：交流供電機組

只有+24或+12 Vdc@100 mA；未調節（±5%最壞情況）

脈沖輸入：

DP-F31:0至1 Vdc（低），3至30 Vdc（高），最大20 kHz（最小開/關35_s）

DP-F32:4.7 kΩ，在輸入端拉至+5 Vdc，用于與接觸地或NPN集電極晶體管脈沖。

系數化輸出：最小開/關：0.013 ms；開路集電極最大下沉100 mA，最大從1到30 Vdc；最大系數化計數速度為20 kHz

溫度：

工作溫度：0至54°C（32至130°F）

儲存溫度：-40至93°C（-40至200°F）

精度：±0.5%fs

繼電器輸出：2個SPDT觸點，在120/240 Vac或28 Vdc下額定電流為10 A。

4至20 mA輸出：±0.5%fs精度；需要3至24 Vdc電源電壓，無感應

DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS232控制器OMEGA

Displays Rate, Batch Total, and Grand Total

Separate K Factors for Rate and Total

12 to 24V Output

Optional 16-Point Linearization

NEMA 4X (IP65) Front-Panel Cover

The DP-F31 ratemeter/totalizer accepts 3 to 30 Vdc pulses, dry-contact closure, voltage, or milliamp inputs, and provides 2-stage SPDT relay outputs for batch control. The display is fully scalable for engineering units and may be toggled between batch total, rate, and grand total. The linearization option allows the user to select up to 16 different K factors over the input range for accurate indication of non-linear signals.

Other features include 12 to 24 Vdc output for powering up flowmeters; pulsed (0.1 to 9.9 s) or maintained outputs; input filtering for dry-contact closure (such as reed relays); local/remote reset; excitation for open-collector or mechanical contacts; user-programmable auto-reset of batch total (repeat cycles, 10 Hz max); security lockout to prevent unauthorized changes; factored pulse output; and analog output for rate or total (analog output not available with square root -SQRT option).

The DP-F30 series indicates rate to 5?-digits and total to 8-digits, with program and count data stored for up to 10 years if power is lost. 

SPECIFICATIONS

Input Power: 110 Vac ±15% or 12 to 27 Vdc std.; 220 Vac ±15% optional

Current: Max 250 mA DC or 3.2 VA

Output Power: On AC-powered units

only: +24 or +12 Vdc @ 100 mA; unregulated (±5% worst case)

Pulse Inputs:

    DP-F31: 0 to 1 Vdc (low), 3 to 30 Vdc (high), 20 kHz max (min on/off 35 ìs)

    DP-F32: 4.7 kΩ pull up to +5 Vdc on input for pulsing with contact to ground or NPN collector transistor

Factored Output: Min on/off: 0.013 ms; open collector sinks 100 mA max from 1 to 30 Vdc max; max factored count speed is 20 kHz

Temperature:

    Operating: 0 to 54°C (32 to 130°F)

    Storage: -40 to 93°C (-40 to 200°F)

Accuracy: ±0.5% FS

Relay Outputs: 2 SPDT contacts rated for 10 A at 120/240 Vac or 28 Vdc

4 to 20 mA Output: ±0.5% FS accuracy; requires 3 to 24 Vdc supply voltage, non-inductive