国产99热精品_欧美疯狂做受xxxx猛交_婷婷在线网站_日韩无遮挡毛片_欧美高清momspuss_欧美激情福利

FMC-5505LA_FMC-5506LA_FMC-5507LA_FMC-5201LA_FMC-5202LA質量流量計OMEGA

質量流量、體積、密度和溫度測量

堅固的儀表，無移動部件，維護工作量***小。

從單個儀表到寬流量范圍內的精度可優化工廠效率

無需流量調節或直管運行，使安裝簡化，成本更低。

根據科里奧利力原理設計了FMC-5000型科里奧利質量流量計。廣泛應用于石油、石化、化工、制藥、制漿造紙、食品乳品等行業的流量測量和交接。它是***種先進的流量和密度測量儀器，廣泛應用于液體、氣體和泥漿的測量，在全球客戶中享有很高的聲譽。科里奧利流量計通常用于批次控制、混合、填充、計量、監管轉移、工藝氣體測量等應用中。

根據科里奧利力原理設計了FMC-5000系列科里奧利計。在交流電作用下，安裝在測量管上的電磁線圈將使兩個平行的測量管以***定的頻率振動。當質量（液體或氣體）流過測量管時，會產生科里奧利力，導致管頂部出現“彎曲”或“偏轉”。這種偏轉被感知為安裝在管子上的兩個電子傳感器之間的相移。相移的程度與管內的質量流成正比。通過檢測管的相移可以計算出質量流量。溫度也被測量并用于補償。

FMC-5505LA_FMC-5506LA_FMC-5507LA_FMC-5201LA_FMC-5202LA質量流量計OMEGA

MEGA

根據科里奧利力原理設計了FMC-5000型科里奧利質量流量計。廣泛應用于石油、石化、化工、制藥、制漿造紙、食品乳品等行業的流量測量和交接。它是一種先進的流量和密度測量儀器，廣泛應用于液體、氣體和泥漿的測量，在全球客戶中享有很高的聲譽?？评飱W利流量計通常用于批次控制、混合、填充、計量、監管轉移、工藝氣體測量等應用中。

FMC-5505LA_FMC-5506LA_FMC-5507LA_FMC-5201LA_FMC-5202LA質量流量計OMEGA

產品描述

 The FMC-5000 Coriolis Mass Flow Meter is designed according to the Coriolis Force Principle. It is widely used for flow measurements and custody transfer in many industries such as petroleum, petrochemical, chemical, pharmaceutical, pulp and paper, food and dairy, and more. As an advanced flow and density measurement instrument, it is widely used in the measurement of liquids, gases and slurries, and garners a high reputation among customers around the globe. Coriolis meters are typically used in applications like batch control, blending, filling, dosing, custody transfer, process gas measurements, and more.

The FMC-5000 Series Coriolis Meter is designed according to the principle of Coriolis force. Under the alternating current effect, the electromagnetic coils mounted on the measuring tube will make two parallel measuring tubes vibrating at a certain fixed frequency. Whenever mass (either liquid or gas) flows through the measuring tubes, Coriolis force is generated, causing a “bending” or “deflection” in the top of the tubes. This deflection is sensed as a phase shift between two electronic pick-ups mounted on the tubes. The degree of phase shift is directly proportional to the mass flow within the tubes. The mass flow rate can be calculated by detecting the phase shift of the tubes. The temperature is also measured and used for compensation.

Specifications

Flow Range: See charts below

Connection: ANSI, DIN, JIS, or Sanitary Tri-Clamp flanges

Maximum Pressure: 16 bar (230 psi), [Optional: 25 bar (360 psi), 40 bar (580 psi) and 63 bar (913.7 psi)]

Body Material: 304 Stainless Steel

Measuring Tube Material: 316 L SS

Process Temperature Range:

    Integrate Type: -50 to 125°C (-58 to 257°F)

    Remote Type (-R): -50 to 200°C (-58 to 392°F)

Ambient Temperature: -40 to 55°C (-40 to 131°F)

Working Humidity: (5 to 95%) RH at 25°C (77°F)

Flow Accuracy/Repeatability:

    FMC-5100: 0.1/0.05% (Liquid Only)

    FMC-5200: 0.2/0.1% (Liquid Only)

    FMC-5500: 0.5/0.25%

Density Measuring:

    Range: 0.2 to 3.0 g/cm3

    Error: ± 0.002 g/cm3

    Repeatability: 0.001 g/cm3

Temperature Accuracy: ±1.0°C

Protection: NEMA 4X (IP65)

Approvals: CE, RoHS

Communications: RS485 (RTU Modbus?), HART? (-HART option)

Pulse Output: 0 to 10 kHz, ± 0.075% Full Scale

Current Output: 4 to 20 mA, 0.005% Full Scale

Power Supply: 18 to 36 Vdc, 85 to 265 Vac (-AC option), 15 W